TP-Link Gigabit Ethernet Media Converter, Up to 1000Mbps RJ45 to 1000Mbps SFP Slot Supporting MiniGBIC Modules (MC220L)

Description

Product description 1 10/100/1000Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Complies with IEEE 802.3ab and IEEE 802.3z FX port supports hot-swappable Extends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiber MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Basic Function Auto-negotiation of Half-Duplex / Full-Duplex transfer modeExtends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiber Ports 1 1000M SFP port1 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length Depends on the used SFP module Network Media 1000BASE-X Multi-mode/Single-mode SFP module Network Media 1000BASE-T UTP category 5, 5e cable (maxium 100m)EIA/TIA-568 100? STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7*2.9*1.1 in. (94.5*73.0*27.0 mm) Power Supply External Power Adapter Max Power Consumption 1.7W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0?~40? (32?~104?)Storage Temperature: -40?~70? (-40?~158?)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~90% non-condensing Distinguishing features: 1 x 1000 Mb/s Ethernet port (RJ-45) SFP slot (IEEE 802.3z 1000Base-FX) LEDs indicating operation status easy installation (plug and play) external AC/DC adapter included The media converter has SFP slot allowing for cooperation with multimode or single-mode optical fibers, depending on the module chosen. All optical transmission parameters depend on the SFP module. TP-LINK MC220L can cooperate with SFP modules compliant with IEEE 802.3z 1000Base-FX standard. The device supports MDI/MDIX auto detection and automatically finds and sets the fastest connection speed and mode. "Store and forward" mechanism verifies the received data using checksum function. TP-LINK MC220L is fully compatible with 1000BaseTX/FX standard. Its installation is very simple thanks to "Plug and Play" feature. The LED indicators show current operating status. Media converters with interchangeable SFP modules can operate in multimode and single-mode networks (transmission via two optical fibers or via single fiber, with the use of modules based on WDM or CWDM technology). The solution is especially cost effective in the case of plans for future expansion of the network (it is sufficient to exchange only the SFP modules). Specifications: Name: TP-LINK MC220L Code: L1311 Standards: IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x LAN port: 1000Base - TX RJ-45 UTP/STP, cat. 3, 4, 5, max. 100 m Optical interface: SFP (IEEE 802.3z 1000Base-FX) Transmission speed: Depends on SFP module Power: 5VDC/1A (AC/DC adapter incl.) Operating temperature: 0... 40 oC NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina! TP-LINK MC220L is compliant with IEEE 802.3z 1000Base-FX standard, so it can cooperate with GbE SFP modules. We offer several GbE SFP transceivers: Name: SFP-023G SFP-2-3G SFP-203/5G SFP-205/3G Code: L1405 L1415 L1416 L1417 Type of optical fiber: multimode single-mode Transmission range: 2 km 20 km Transmission speed: 1.25 Gb/s 1.25 Gb/s Wavelength (Tx/Rx): 1310/1310 1310/1550 1550/1310 Connectors: 2x LC 2x LC 1x SC 1x SC Why to choose fiber optics: possibility of sending signal over long distances (low attenuation of optical fibers - e.g. for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200 km - without regeneration) high-volume information transfer via single fiber resistance to electromagnetic interference resistance to weather conditions (humidity, electrostatic discharges and others) no possibility of tapping low weight and small dimensions